Mowers, pine straw, and settling clay knock heads below grade or crack the body. Mixing a rotor into a spray zone is how you get misting and dry corners. We match body, arc, and nozzle so the precipitation rate stays even.
Heads in The Woodlands sit in St. Augustine that gets thick in June. If the body is below grade, the spray hits grass blades and never reaches the next head. If it sits high, the mower deck clips it. We set the new body flush with the soil, not with last year’s thatch.
A rotor dropped into a spray station is a common DIY leftover in Sterling Ridge and College Park. Precipitation rates do not match, so one corner floods and one stays brown. We put the same family of nozzles on the whole run.
Pine straw packs around the stem. We clean it, replace the screen if it is packed with grit, and aim off sidewalks and siding. Overspray on a Woodlands Water schedule is wasted days, not just wasted gallons.
What we look for
- Heads stuck up after the cycle
- Geysers or sideways spray
- Missing nozzles or cracked caps
- Heads buried under thatch or pine straw
On the visit
- Identify type, arc, and nozzle on the zone
- Set the new head to grade
- Match precipitation rate across the run
- Aim off sidewalks, fences, and house siding
Related
From the blog